Hamilton G5 Ventilator

The Hamilton G5 Ventilator was designed for the most complex, critically ill patients in all ICU settings where lung protection is of paramount importance.
 

The HAMILTON-G5 mechanical ventilator provides effective, safe, and lung-protective ventilation for adult, pediatric, and neonatal patients. For neonatal patients, a specifically developed neonatal proximal flow sensor is used. The tidal volume range goes down to as low as 2 ml.
 

Protective Ventilation Tool (P/V Tool Pro)

Performs a respiratory mechanics maneuver that records a quasi-static pressure/volume curve. This method can be used to assess lung recruitability and determine the recruitment strategy to apply.
 

Noninvasive Ventilation Modes

Deliver pressure-supported, flow-cycled spontaneous breaths (NIV and NIV-ST mode) and pressure-controlled, time-cycled mandatory breaths (NIV-ST mode). In NIV modes, the ventilator functions as a demand flow system. When pressure support in NIV mode is set to zero, the ventilator functions like a conventional CPAP system.
 

Ventilation Modes

• Intelligent ventilation modes with Adaptive Support Ventilation (ASV)
• Pressure-controlled modes (including biphasic modes)
• Volume controlled-modes (adaptive)
• Conventional volume-controlled modes
• Pressure and volume support modes
• Neonatal CPAP (nCPAP) modes
   

IntelliSync+

Keeps an eye on patient-ventilator synchrony by continuously analyzing waveform shapes hundreds of times per second. This allows IntelliSync+ to detect patient efforts and cycling immediately, and initiate inspiration and expiration in real-time. IntelliSync+ applies to invasive and noninvasive ventilation, regardless of the ventilation mode.
 

Transpulmonary Pressure Measurement

Esophageal pressure is considered  a substitute for pleural pressure. Partitioning of lung and chest wall compliance is then possible and is very useful to set PEEP and tidal volume, assess lung recruitability, and perform recruitment maneuvers. Transpulmonary pressure is airway pressure minus esophageal pressure measured during an end-inspiratory or end-expiratory occlusion, and represents the pressure to distend the lung parenchyma.
 

Transpulmonary pressure allows customization of ventilator settings to optimize lung recruitment and protective ventilation in mechanically ventilated patients.
 

High Flow Oxygen Therapy

The HAMILTON-G5 optionally provides an integrated high flow oxygen therapy* mode. With this enhancement, the HAMILTON-G5 gives you a variety of therapy options in one device, including invasive and noninvasive ventilation, and high flow oxygen therapy. In just a few steps, you can change the interface and use the same device and breathing circuit to accommodate your patient’s needs.
 

Noninvasive Ventilation (NIV)

The noninvasive ventilation modes deliver pressure-supported, flow-cycled spontaneous breaths (NIV and NIV-ST mode) and pressure-controlled, time-cycled mandatory breaths (NIV-ST mode). In NIV modes, the ventilator functions as a demand flow system. When pressure support in NIV mode is set to zero, the ventilator functions like a conventional CPAP system.
 

Volumetric Capnography

Proximal flow and CO2 measurement enables Hamilton Medical ventilators to perform up-to-date volumetric capnography, which provides an important basis for the assessment of ventilation quality and metabolic activity.
 

SpO2 Measurement

The integration of the SpO2 option with Hamilton Medical ventilators offers an innovative solution for noninvasive measurement. Hamilton Medical also provides a comprehensive portfolio of SpO2 sensors.
 

IntelliCuff Integrated Automatic Cuff Pressure Controller

IntelliCuff is a new noninvasive automatic cuff pressure controller integrated with the ventilator. IntelliCuff continuously monitors and automatically adjusts cuffed tracheal and tracheostomy tubes, providing real-time optimization of cuff pressure.
 

Integrated Aerogen Nebulizer

An integrated synchronized Aerogen® nebulizer helps to conserve expensive medications. It improves drug delivery efficiency, and offers the potential to reduce drug and personnel costs associated with in-patient treatment, while maintaining the integrity of ventilator-dependent care.
 

Integrated Pneumatic Nebulizer

The integrated pneumatic nebulizer is fully synchronized with the inspiration and exhalation timing. The delivery of a fine mist of drug aerosol particles helps you improve your ventilation efficiency, for example in cases of bronchospasm or chronic hypercapnia.
 

Adaptive Support Ventilation (ASV)

Adaptive Support Ventilation® (ASV®). ASV continuously adjusts respiratory rate, tidal volume, and inspiratory pressure depending on the patient’s lung mechanics and effort. ASV adapts ventilation breath-by-breath, 24 hours a day, from intubation to extubation.